The SRS DC90SS Model

SRS DC90SS Overview Blog

The DC90SS is an upgraded version for one of our bestselling keypads, the DC60SS. This modern keypad combines digital keypad and proximity reader in one unit. It has been designed for stand-alone access control applications. The device is vandal resistant and weatherproof.

The digital keypad has two relay outputs to operate a car gate or pedestrian gate with pin or a proximity tag, making gates secure but still very accessible. You can set up a relay output to operate with a time delay or permanent latch.

Features

  • PIN only, card only and PIN + card operation
  • Interlock module built-in
  • Intelligent egress button to monitor unattended leaving or unauthorised exit.
  • Vandal Resistant Weatherproof Keypad with Back-lit Metal Key Buttons
  • 1,000 User capacity for Controlling Output 1 and 100 Users for Outputs 2
  • 50 Temporary Visitor codes, which expire after single use or after reaching a resettable time limit (1-99 Hours)
  • Programmable lock time (01 – 9999 sec.)
  • Programmable 24 hours real-time-clock

Technical Data

  • Housing: Die Cast Zinc Alloy with brushed Stainless Steel faceplate.
  • Dimensions: 144 (H) x 78 (W) x 29 (D) mm.
  • Environment: Indoor or outdoor use (IP65 design).
  • Temperature: -20 to +70 C.
  • Voltage: 12 to 24 V AC/DC.
  • Proximity card: Standard EM Card or Keyfob, 125Khz, Manchester 64-bit.
  • Inputs: Exit button requests with delay.
  • Outputs: 2 x Voltage free relay contact, max 1A, 28 V DC.

You can shop for the DC90SS here or call our highly knowledgeable team on 0208 621 6210

Please follow and like us: